COIL TYPE NOZZLE BAND HEATERS Coil Type Nozzle Band Heaters are specially designed to prevent the failure of heaters against the leakage of plastic material at nozzle.These heaters gives higher temperature(above 250C) at nozzle point which is required for H.D. Plastics such as Nylon, ABS, Delrin. Application Heating of Nozzle of Plastic Moulding and extrusion M/C, Hot Stamping, Plastic Riveting COIL TYPE NOZZLE BAND HEATERS Outer Sheath-SS Inner Sheath -Brass/ Aluminum/SS Diameter-Min.25 MM Lenth-Min.25 MM Thickness-10/12 MM can be supplied with in built Temperature Sensor J or K type. .More Life, Higher Temperature .No failure Against leakage